Basic Info.
After-sales Service
Provide
Certification
GS, CE, ISO9001
Operation Form
Air Operation+Ground Operation
Maximum Lifting Height
20-25m
Maximum Lifting Weight
50-100t
Main Girder Form
Double Girder
on-Site Maintenance
Provide
Hoisting Mechanism
Electric Winch Trolley
Application
Mineral Area Usage
Max.Wheel Pressure(kN)
8.76~125.56
Lifting Speed(M/Min)
0.8/5; 0.66/4 Frequency Inverter
Whole Machine Quality(Kg)
1700~13318kg
Motor
Soft Stard Traveling Motor
Power Source
380V 50Hz 3-pH,AC
Installation
Overall Rapid Disassembly
Transport Package
Standard Sea Freight Packing
Specification
Customization
Origin
Xinxiang, Henan Province
Product Description
Product Description
Double girder EOT mobile crane with grab bucket and electromagnet for steel scrap disposal
QP type grab electromagnetic double-girder bridge crane has both a grab and an electromagnetic sucker. The electromagnetic sucker mainly uses the electromagnetic principle to transport steel objects, and the main part is a magnet. When the current is turned on, the electromagnet will firmly attract the steel object and lift it to the designated place. Cut off the current, the magnetism disappears, and the steel item is put down. Electromagnetic cranes are very convenient to use, but they can only be used when there is current. They can be used in scrap steel recycling departments and steel making workshops. The electromagnetic crane can generate a strong magnetic force, and dozens of tons of iron sheets, iron wires, iron nails, scrap iron and other iron materials can be easily collected and transported without packing, packing or bundling. The operation is labor-saving and the work is simplified. Steel materials and machines in wooden crates can be handled similarly. When the crane is working, as long as the current in the electromagnet coil does not stop, the heavy objects that are sucked up will not fall, and the invisible magnetic force is more reliable than a solid chain. If the power is cut off for some reason, the crane generally has a safety protection device and a battery, which can generally be maintained for about half an hour after the power failure, so as to avoid accidents such as power failures that cause the objects attached to the disk to fall and cause accidents. Cranes cannot handle hot iron, because hot steel cannot be magnetized. The grab electromagnetic bridge crane is also equipped with a grab, which can be used to grab scraps and other objects. Therefore, this type of crane can meet the two work occasions of grabbing and adsorbing steel waste, and has a wide range of applications.
Product configuration:
1. Grab electromagnetic dual-purpose bridge crane operating room is separated and closed.
2. The entrance of the control room platform of the grab electromagnetic dual-purpose bridge crane is divided into three types: side surface, end surface and top surface.
3.Added height for cart bumpers.
4. Grab electromagnetic dual-purpose bridge cranes are divided into indoor and indoor types. When ordering, the technical requirements such as the maximum and minimum temperature of the working environment and the type of power supply should be indicated.
5. An overload limiter, a large-screen display and various protection devices are added, which further increases the safety during use.
6. The aerial operation method generally adopted by the grab electromagnetic dual-purpose bridge crane.
Product Features
1).Heavy duty slip ring motor, IP54 or IP55, insulation class F or H, soft starting and smooth running.
2). Wheels, wire rope drum,gears, couplings are processed by CNC machine center, Top quality control.
3). International famous brand main electrical parts are used for durable and safe operation.
Safety System
1. Overload protection in the event of overload, the hoist unit switches off and only the lowering motion is possible
2. Long and cross travel limited by means of preliminary and final limit switches or Wireless anti-collision device
3. Anti-falling protection for the Three-in-One electric motor of trolley and crane prevents from accidental falling
4. All movements can be switched off by actuating the emergency-off switch at the control station via a main contact
5. High quality long time bearing polyurethane materials buffer fixed at the end of trolley travelling and crane travelling to prevent over traveling
6. Safety hook latch used for avoiding the lifted material out off from the hook
7. Audible and visual alarm device to inform the person stay near by the travelling crane.
8. Rain Cover for lifting mechanism of outdoor cranes, electric cabinet and driving mechanism
9. Protective earth conductor is fitted as standard
10. Voltage lower protection system
11. Current overload protection system
Product Parameters
Installation service
Henan Mine Crane Co.,LTD crane could supply not only overhead crane but also the overhead crane solutions. Firstly, we will supply overhead bridge crane design, overhead crane manual, overhead crane drawing, overhead crane wiring diagram, overhead crane electrical diagram and overhead crane safety video before or after delivery, our technician will do supervision the installation according to the document, of course, the customer can do installation by themselves according to their requirement.
After installation, our technician will indicate to do the load test according to the overhead crane load test procedure, then overhead crane operator training and overhead crane maintenance training, all the procedure will be made according to the overhead crane training videos and overhead crane training PowerPoint
FAQ
Q1: What's the information should I provide when inquiry?
A1: The more details or drawings,the better.Such as Lifting capacity, Lifting height,Span,Voltage or others special requirements.
Q2: Can you provide custom service?
A2: Yes, of course. We are manufacturer and we have our own engineer group.They can out customized design according to your requirement. You just need to tell us your requirements.
Q3: Are there professional technicians to assist in the installation?
A3: Yes. We have a professional installation team and have been to many countries to assist in installation. lf you need us to provide this service,please let us know in advance and we will provide you with the best solution.
Q4: How do you guarantee the quality?
A4: We will constantly check the quality during the manufacturing process, and strictly test the equipment before shipment, and we will also send you a quality certificate.
Q5: What international certifications have your crane passed?
A5: Our crane has passed CE,ISO,GOST.SGS,TUV.BV.and so on.
I want to inquire about other questions>>
Address:
Intersection of Weisan Road and Kuangshan Road, Changnao Industry Park, Changyuan, Henan
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Henan Mine Crane (hereinafter referred to as "Henan Mine") was established in 2002, the company′s construction area of 1.62 million square meters, the existing staff of more than 4, 700 people, with more than 3, 500 sets of various types of advanced processing equipment (sets).
The company specializes in R&D, design, production, sales and service of more than 110 types of cranes and ancillary products in three series, including "Kuangyuan" brand bridge cranes, gantry cranes and electric hoists.
As a professional manufacturer and service provider of cranes and material handling products, the company is able to provide customers with total solutions and full life cycle services, and is committed to the intelligent, green and high-quality development of the crane industry.